Services
Paint Correction & Ceramic Coating
Rupes paint correction + System X ceramic coatings, CarFax registered.
Paint Correction
Rupes machine polishing
What is Paint Correction?
Paint correction is a professional detailing process designed to remove surface imperfections — swirl marks, fine scratches, oxidation, water spots, and other paint defects. This multi-step procedure involves meticulous washing, clay bar treatment to remove embedded contaminants, machine polishing with high-quality Rupes systems, and buffing to restore your vehicle's paint to a smooth, glossy finish.
Proper paint correction is also the essential first step before any ceramic coating. It ensures a clean, flawless surface so the coating bonds correctly and performs optimally, maximizing both durability and appearance.
| Package | Description | Cars | Trucks/SUVs | 7-Seater/Vans |
|---|---|---|---|---|
| 1-Step | Single-stage polish — removes approximately 60% of swirl marks, light scratches, and oxidation, restoring clarity and gloss. Ideal for newer or well-maintained vehicles. Service Time: Full day | Starting at $350 | Starting at $450 | Starting at $550 |
| 2-Step | Multi-stage process (cutting compound + finishing polish) — removes approximately 80%–90% of swirls, deeper scratches, oxidation, and severe defects for a near-flawless, high-gloss finish. Service Time: Full day+ | Starting at $650 | Starting at $800 | Starting at $950 |
| Correction percentages are typical results — outcomes vary with paint hardness and defect depth. Exact expectations confirmed at in-person inspection. | ||||
Every Paint Correction Includes:
- Foam Pre-Soak + Hand Wash
- Bug & Tar Removal
- Full Clay Bar Decontamination
- Iron / Fallout Removal
- Dry + Tape-Off (trim & plastics protected)
- Machine Polishing (Rupes systems, premium pads & compounds)
- Panel Wipe (IPA) to prep the surface for protection
- Final inspection and buffing to perfection
Every correction finishes with a Hand-Applied Paint Sealant (up to 1 year of protection) so your freshly corrected paint isn't left unprotected — or upgrade to a System X Ceramic Coating to lock in the results permanently with a warranty-backed shield (see below).
System X Ceramic Coating
Bonded, glossy protection
What is Ceramic Coating?
Ceramic coating is a cutting-edge liquid polymer applied to your vehicle's paint that chemically bonds to the surface, creating a durable, glossy protective layer. It shields your paint from UV rays, chemical stains, bird droppings, road salt, and minor scratches — while significantly simplifying cleaning and maintenance.
We exclusively use System X ceramic coatings, renowned for their long-lasting protection, exceptional gloss, and industry-backed warranty. Every warrantied coating application is registered with CarFax, adding resale value and peace of mind.
Why Choose Ceramic Coating?
- Long-term protection from UV damage, chemicals, bird droppings, and road salt
- Ultra-glossy, slick finish that enhances your vehicle's appearance
- Easier washing and reduced maintenance time
- Industry-leading warranty and CarFax registration
| Coating | Warranty | Cars | SUVs/Trucks | 7-Seater/Vans |
|---|---|---|---|---|
| Crystal+ | 2-Year Warranty | $600–$850 | $750–$950 | $850–$1,050 |
| Pro+ | Up to 6-Year Warranty | $850–$1,050 | $1,000–$1,200 | $1,050–$1,250 |
| Max G+ | Lifetime (Autos & Motorcycles) | From $1,500 | From $1,750 | From $1,950 |
| Max MF (Matte & Satin) | Ask for details | Quote-based | Quote-based | Quote-based |
Final price based on vehicle condition and the correction level required.
Surface Enhancers & Maintenance Coatings
Boost gloss, hydrophobicity, and durability. Great for maintenance or short-term ceramic coverage.
| Product | Starting Price |
|---|---|
| Renew (standalone hyper-gloss coat or coating booster) | $150–$240 |
Interior Coating Services
Protect your cabin from UV, stains, and wear with long-lasting ceramic formulas.
| Surface | Cars | SUVs/Vans |
|---|---|---|
| Textile (Carpet & Fabric Seats) | $150–$200 | $200–$250 |
| LVP — Leather/Vinyl/Plastic (3-Year Warranty) | $350–$350 | $350–$400 |
A full interior coating requires both Textile and LVP — together they cover every surface type (carpets, fabric, leather, vinyl, and plastic). Want just one area done, like leather seats only? Textile and LVP can be booked separately at the starting prices above.
Interior coatings bond only to a fully prepped surface — a Premium Interior & Steam is required first (priced separately, completed together as one job). The coating price is application only.
Glass Coatings — System X Glass+
Hydrophobic protection for windshields and full vehicle glass. Up to 2 years of dramatically improved wet-weather visibility, easier de-icing, and effortless bug removal.
| Service | Price |
|---|---|
| Windshield Only | $165–$200 |
| Full Glass Coating (All Windows) | $250–$300 |
Speciality Coatings
High-wear zones need high-level protection too.
| Area | Price |
|---|---|
| Wheel Coating — On-Vehicle (System X Wheel+): face & outer lip, reaching through the spokes as far as possible | $65–$100 per wheel |
| Exterior Plastic & Trim — System X Revive | $150–$250 |
Wheels already off the vehicle? If your wheels are off — for example, during a tire change or seasonal swap — we can coat the complete wheel, including the barrels and backs. Priced per wheel at inspection. Note: we do not remove or remount wheels; they must already be off the vehicle.
Marine & Jet Ski Coating
| Type | Pricing |
|---|---|
| Boats — Xtreme SS (coating only; polish prep priced separately by condition) | $85–$125 per ft |
| Jet Skis | $450–$800 |
See our full WillsieIt Marine Shine menu for detailing, polish prep, warranty details, and dockside service.
Application Process
Decontamination & Prep
Thorough wash, iron remover, clay bar treatment, paint correction (if required), and IPA wipe-down.
Coating Application
Applied in 2x2 ft sections using a cross-hatch pattern, with product-specific flash times per System X standards.
Buffing
Towel 1: Light pressure leveling
Towel 2: Circular motion residue removal
Towel 3: Final polish for ultra-slick finish
Curing
Dry to touch in 20 minutes
Avoid water contact for 24 hours
Full hardness achieved after 72 hours
No washing for 7 days
System X Coating Breakdown
What each tier delivers
An accessible, high-gloss, super-slick ceramic coating with semi-permanent self-cleaning properties. Crystal+ interlocks with the surface molecules of your paint — it isn't washed off like a wax or sealant.
Best for: Daily drivers, leased vehicles, customers wanting real ceramic protection without long-term commitment.
A super-slick, super-hydrophobic 9H self-cleaning ceramic coating. Pro+ has passed rigorous Boeing approval testing and has been evaluated for hardness, alkali, and salt resistance by SGS laboratory.
Best for: Customers who want premium long-term protection and the security of a full manufacturer warranty.
System X's highest-level coating for paint, gel coat, gloss wraps, and gloss PPF. Built on the industry-proven Max resin system — up to 4x thicker, 2x stronger, and 2x more durable than previous coatings — with the G+ formulation delivering a 30% glossier finish and improved gloss retention.
Warranty by vehicle type:
- Lifetime warranty: Automobiles & Motorcycles
- 5-year warranty: Boats
- 3-year warranty: Powersports, RVs, Fleet Vehicles
- 2-year warranty: Aircraft
Warranty requires Accredited Installation + annual inspection.
Best for: Premium vehicles, show cars, long-term keepers, and customers who want the absolute best protection available.
The first-of-its-kind ceramic coating designed specifically for matte and satin finishes — paint, wraps, and PPF. Built in the same industry-proven Max resin system as Max G+, Max MF protects the surface while retaining the natural matte look, with zero added gloss.
Best for: Matte and satin paint, satin wraps, and matte PPF — finishes that can't be polished and need protection that won't alter their look. Quoted after in-person inspection.
Warranty & CarFax Registration
Industry-backed, registered to your VIN
Every warrantied System X coating is officially registered with CarFax under your vehicle's VIN. This means:
- The coating appears on your CarFax vehicle history report
- Added resale/trade-in value when you sell
- Independent verification that your vehicle was professionally coated by an Accredited Installer
- Industry-recognized proof of long-term care
- Coating must be applied by an Accredited Installation Center
- Annual Inspection must be completed within the warranty period
- Damage must be reported within 30 days of discovery
- Warranty is non-transferable — stays with the original registered owner
- No automatic touch / brush tunnel car washes — these void the warranty
- Use only coating-safe products and methods (care guidelines provided after install)
| Coating Tier | Cars | Trucks/SUVs | 7-Seater/Vans |
|---|---|---|---|
| Crystal+ | $125 | $150 | $175 |
| Pro+ | $175 | $200 | $225 |
| Max G+ / Max MF | $225 | $250 | $275 |
Each annual inspection includes:
- Full exterior wash
- Iron remover + decontamination
- Renew booster application (restores hydrophobic performance)
- Full coating inspection (gloss, beading, slickness check)
- Touch-up of any high-wear areas
- Registration of inspection at SystemX.com within 30 days
Service time: ~1.5–2 hours depending on vehicle size and coating tier.
Full warranty terms & product details: SystemX.com ↗ ·
System X Certified Installer
Warranty-backed ceramic coatings, CarFax registered.
Rupes Trained
Industry-leading paint correction tooling.
CarFax Registered
Coatings registered to your VIN.
Ready when you are
We come to you
Kitchener
Waterloo
+ Surrounding Areas